Hot Item 12VDC Microwave Highbay Sensor Dimming Function For UFO Highbay Light
Specification
- 12VDC Input
- 0-10V Dimming
- Easy Wiring Connection
- Remote Control HD03R
- Small Size for UFO and other Applications
Parameter Table
| Operating voltage | 10.5-15V DC |
| Operating Current | 30mA±5% |
| Stand-by power | ≤0.5W |
| Detection area | 10%/50%/75%/100% |
| Hold time | 5s/30s/1min/3min/5min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable |
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Mounting height | Max.15m ( 49.21ft ) |
| Detection range | Max.ø14m/45.93ft |
| Detection angle | 30°-150° |
| Operating temperature | -20°C~+60°C |
| IP rating | IP65 |
| Life time | 50,000 hours |
| Warranty | 5 years |
Factory Default Setting
- Detection area 100%
- Hold time 5s
- Daylight threshold Disable
- Stand-by period 0s
- Stand-by dimming level 10%.
Remote Control
#HD03R, the standard remote control
Specification download: HD03R
.pdf
Performance
* Daylight Threshold
With sufficient daylight, even when motion detected, light remains
OFF.
* Photocell Function
With insufficient daylight, sensor turns ON light even there's
motion detected
During the infinite standby period, the sensor turns OFF the light
automatically when it's DARK enough.
Preconditions
- Daylight threshold as 30Lux or higher, options are 50lux, 80lux or
120lux.
- Standby dimming level as 10% 20% or 30%
- Standby period as infinite+∞
* Bi-Level Dim
When motion is detected, the sensor will switch on the light to
100% brighteness.
After people leave the detection area, light remains 100%
brightness for the hold time.
After holdtime, sensor dims light to standby dimming level (10% 20%
30% 50%) and keeps for a standby period.
After standby period,sensors turns OFF the light.
* ON/OFF
When motion is detected, the sensor will switch on the light to
100% brighteness.
After people leave the detection area, light remains 100%
brightness for the hold time.
Preset standby period as 0S, sensor turns OFF the light after
holdtime.
HD06VCRH
3.pdf
