Plug And Play Structure Dimming DC Motion Sensor Easy For Install
Plug And Play Structure DC Input Dimming Function Easy For Install
Mechanical structure of Motion Sensor:
| Connect method | Connecting line 300mm,+12V(Red),GND(Grey),DIM+(Purple),peeled and
tin-soaked 30mm |
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Daylight harvesting | It is set to be effective when the waiting time of 10%/20%/30%
brightness is infinite and 120LUX/80LUX/50LUX/30LUX |
| Detection area | 100%/75%/50%/25% |
| Hold time | 5s/30s/1min/3min/5min/10min/20min/30min |
| Daylight threshold | Disable/120Lux80Lux/50Lux/30Lux/10Lux/2Lux |
Daylight priority of DC sensor:
Dusk/Dawn sensor:
Dual-PD technology brings a fully automatic dusk/dawn sensor which
can tell the difference between
natural light and LED light, to ensure the light will be off when
needed.
Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10%, 20% or 30%;
3. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux.
Installation of DC motion sensor:
| Installation precautions of motion sensor | 1. Microwave sensor can be installed in any lamp except the one
with full metal shell. |
| 2. The detected surface cannot be shielded by metal objects. |
| 3. Make sure the microwave module is completely exposed outside. |
| 4. The detection surface of the sensor module shall be installed
facing the detection area. |
| 5. Should be kept away from the driver to avoid interference
generation and lamp flashing. |
| 6. Wiring must be strictly in accordance with the wiring diagram to
avoid short circuit. |
Plug and play design,super easy for customers to install on the
lamps.
Wiring diagram of Motion Sensor:
| Wire color | Cable length 300mm , +12V(Red),GND(Grey),DIM+(Purple) |
| Control method | On/off / 1-10V /remote control |
| Microwave frequency | 5.8GHz±75MHz |
| Operating voltage | 10.5-15V DC (supply current>50mA) |
| Sensor color | Black,white |
Detection coverage of Motion Sensor:
This figure indicates the maximum distance at the highest mounting
height with 100% sensitivity.
| Mounting height | 15m/49.2ft (ceiling mounted) |
| Detection range | Max,ø14m/45.92ft (ceiling mounted) |
| Detection angle | 30°-150° (without glass) |
| Motion detection | 0.5~1.5m/s |
Product Description of Sensor:
| Dimming mode | Add and subtract the dimmer |
| Connect method | Connecting line 300mm,+12V(Red),GND(Grey),DIM+(Purple) |
| Operating temperature | -20°C~+60°C |
| Operating voltage | 10-15VDC (supply current>50mA) |
| Warranty | 5 years |
| Stand-by power | <30mA |
| Function setting | By remote control |
| Control method | DIM/1-10V / remote control |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| IP grade | IP 65 |
Dimensional drawing (Unit: mm) of Motion Sensor:
Compact size suitable for all kinds of which high altitude install
lamps.
Features of Sensor:
1. PLUG&PLAY Structure
2. Reduce inventory for retailers
3. Changable function by changing the module only
4. Dual PD with Daylight Priority function
5. IP65 rating to support outdoor installation
6. 15m mounting height to be suitable for warehouse, gym
7. 10-100% output adjustment under ON/OFF mode; 60-100% output
adjustment under sensor mode
8. Support ON/OFF and Dimming sensor mode
HD06VCRH
3.pdf
