Input 10V 15V DC Motion Sensor Microwave 8 DIP Switch Control
PWM 0-10V Dimming Function DIP Switch For Ceiling Tri-proof Light
Features of DC sensor:
1. Stand-by power ≤0.5W
2. It is adapted 10-15VDC input design
3. With DC operation voltage from LED driver, no need extra power
from line
4. Work with 1-10v dimmable led driver for 2-step dimming function
5. Particularly suitable for price sensitive luminaries
6. Stand-by power ≤0.5W
7. 8 DIP switch keys to set hold time, stand-by dimming level,
stand-by period
8. φ5.5mm rod antenna, need a small hole to expose the antenna, no
shadow, no affection on the light beads array
9. 39.9mm width for being applied to tri-proof light perfectly
10. 2.5-4m mounting height for being applied in parking lot, lowbay
warehouse
11. 2-5m detected radius
12. Operating temperature: -25~60℃
13. Better to ceiling installation
Dimmensions of DC sensor:
| Size | L*W*H:76.9*39.9*27.7MM |
| Operating temperature | -20°C~+55°C |
| Warranty | 5 years |
| Function setting | By 8 dial switvh |
| IP grade | IP 20 |
Wiring diagarm of DC sensor:
| Control mode | ON/OFF /dimming(PWM) |
| Output | 5V PWM |
| Stand-by power | ≤0.5W |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Operating voltage | 12-15V DC |
| Input current | 30mA(Max) |
Detection coverage of DC sensor:
| Mounting height | 2.5-4m (ceiling mounted) |
| Detection range | Radius,4-8m (ceiling mounted) |
| Detection angle | ≤150°(Without glass) |
| Motion detection | 0.5~1.5m/s |
Mechanical structure of DC sensor:
| Mode swapping | PWM |
| Detection area | 50%/100% |
| Setting mode | DIP switch |
| Hold time | 5s/30s/1min/5min |
| Daylight threshold | 2Lux/10Lux/50Lux/disable |
| Stand-by period | 0s/30s/5min/+∞ |
| Stand-by dimming level | 10%/30% |
Setting of DC sensor:
|
|
|
| Detection area(1) | In this area,movement will be detected and able to trigger the
sensor.100% detection area is also known as the strong sensitvity. |
Hold-time(2,3) | The period of light keeping 100% brightness after moving objects
leave the detection area. |
Daylight threshold(4,5) | Definition of the ambient brightness;only when the ambient
brightness is lower than the preset specific lux amount, the sensor
will work; when it's preset as "disable",the sensor works everytime
it detects motion regardless the ambient brightness. |
Stand-by period(6,7) | The period of light keeping low output before it's completely
switched off.When it's preset as"∞“, the light always keep at low
output if no movement in the detection area and doesn't turn off. |
| Stand-by dimming level(8) | The definition of low output in the standby period. |
HD04V
2.pdf
