Durable Illuminated 5.8GHz Auto On Off Sensor With Planar Antenna
Liner Appearance Max. 400W Load ON/OFF Sensor Planar Antenna For
Tri-Poof Light
Features:
1. Automatically ON/OFF control when detect movement.
2. Daylight function to keep light off with sufficient brightness
even detect movement.
3. Optional detection range, holdtime and daylight threshold.
4. DIP Switch setting
5. Liner compact size suitable for Tri-Proof light.
6. Loop in and loop out for easy installation.
7. IP 20 with 5 years warranty.
8. Certificate of TUV / RED / SAA / CE
Product Description
| Input voltage | 220~240VAC 50/60Hz |
| Switching capacity | Max.400W(Control gear); Max.800W(Incandescent lamp) |
| Stand-by power | ≤0.5W |
| Detection area | 10%/50%/75%/100% |
| Hold time | 5s/90s/5min/15min |
| Daylight threshold | 2Lux /10Lux /50Lux/Disable |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Detection angle | 30°-150° |
| Mounting height | 2.5-6m/8.2-19.68ft (ceiling mounted) |
| Detection range | Radius, 3-6m/9.84-19.68ft (ceiling mounted) |
| Motion detection | 0.5~1.5m/s |
| Operating temperature | Ta: -20°C+60°C |
| IP rating | IP20 |
| Warranty | 5 years |
Detection Range
This figure indicates the maximum distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-6m.
Mechanical structure
With six DIP switch poles to set all parameters
With four poles to easily connect with LED driver and power supply
With two installation hole, easily fixed to the lighting fixture
for end user.
Detection Area:
In this area, movement will be detected and able to trriger the
sensor,100% detection area is known as the strong sensitivity.
Hold Time:
The period of light keeping 100% brightness after moving objects
leave the detection area.
Daylight Threshold:
Definition of the ambient brightness;only when the ambient
brightness is lower than the preset spcific lux amount,the sensor
will work;when it's preset as "disable",the sensor works everytime
it detects motion regardless the ambient brigtness.
User Notes:
1. Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume.
4. Conduct test on sunny days without the lampshade which will
affect the tested lux value.
