IP20 5.8GHz Microwave Switch Occupancy Sensor Ceiling Light Fixture
Rod Antenna Microwave Motion Sensor ON/OFF function installed
inside of the lighting fixture
Features:
- 5.8GHz Micorwave Motion Sensor with rod antenna module for
switching ON/OFF.
- With DIP Switch on front which should open a hole for adjusting the
DIP switch.
- With rod antenna module which make it happen to open a very small
hole with only removing 1-2 light beads to avoid any shading.
- Rod antenna design which mostly improve the stability of the sensor
when installed backside of the metal board inside of the lighting
fixture.
- Automatically detect the daylight and remain OFF even detect any
movement when the natural light is sufficient.
- Mounting height could be 4M and detection diameter could be 12M.
- Getting different effect and requirements by selecting different
detection area, hold time and daylight threshold set by the DIP
switch.
- IP Rating would be IP20 and 5 years of warranty.
- Certificate of TUV, CE, RED, SAA.
Specifications:
| Input | Operating Voltage | 220-240VAC 50/60Hz |
| Stand-by Power | ≤0.5W |
| Switching Capacity | Load Type | Max. 100W |
Sensor Parameters | Hold Time | 5s/60s/3min/10min |
| Detection area | 50% / 100% |
| Daylight Threshold | 30Lux/Disable |
| Mounting Height | Max.4m(ceiling mounted) |
| Detection Range | Max.12m(ceiling mounted) |
Wireless Parameters | Operating Frequency | 5.8 GHz ±75 MHz |
| Switch Control | 0N/0FF |
Operating Environment | Operating Temperature | -20℃~+60℃ |
| Certificate | Certificate Requirement | CE / TUV / RoHs / RED |
Others | IP Rating | IP20 (Built-in) |
| Installation Size | 76.9 X 39.9 X 27.7mm |
| Packaging Requirement | Bubble bag +Outer Carton(K=A) |
| Life | 50000h |
ON/OFF Daylight sensor Detection area Warranty 5 years Hold time
Wiring diagram:
4-pole press-in terminal (L, N,N,L′),easy assembly.
Detection coverage:
Max. detection range will be 12m for ceiling mounted.
DIP Switch Settings:
Detection area Hold-time Daylight threshold
Detection area means Hold-time means the Daylight sensor priors
detection coverage. It Time period the light to motion sensor. Set
can be adjusted by Will be ON after the threshold for specific
combining DIP last detection. needs. If disable, only
switches for specific motion sensor works.
application.
Application Demo - Function Demo-On/off control:
With sufficient daylight, With insufficient daylight, After the
last detection
even when motion when motion detected, and the present hold
detected, light remains light ON. time elapsed, light OFF.
Application:
The motion sensor can penetrate most of objects such as glass,
wood, plastic but metal. It won’t be affected by ambient
temperature, dust and widely applied in office, corridor.
HD011S.pdf
