Automatic HD08S Motion Sensor ON OFF Switch Super Compact Design
Super compact Microwave Motion Sensor with automatic switch ON/OFF
function
Features:
- 5.8GHz Micorwave Motion Sensor with ON/OFF function.
- Super compact design with size of 60.6*35.5*25.1mm to be easily
installed inside of kinds of LED light.
- Automatically detect the daylight and remain OFF even detect any
movement when the natural light is sufficient.
- Particularly good value for money which would cost down the whole
project.
- Getting different effect and requirements by selecting different
detection area, hold time and daylight threshold set by the DIP
switch.
- IP Rating would be IP20 and 5 years of warranty.
- Certificate of TUV, CE, RED, SAA.
Specifications:
| Input | Operating Voltage | 220-240VAC 50/60Hz |
| Stand-by Power | ≤0.5W |
| Output | Load Type | Max. 400W (Control gear); Max.800W(Incandescent lamp) |
Sensor Parameters | Hold Time | 5s/60s/3min/10min |
| Detection area | 50% / 100% |
| Daylight Threshold | 30Lux/Disable |
| Mounting Height | Max.5m(ceiling mounted); Max.3m(wall mounted) |
| Detection Range | Max.12m(ceiling mounted); Max.10m(wall mounted) |
Wireless Parameters | Operating Frequency | 5.8 GHz ±75 MHz |
| Switch Control | 0N/0FF |
Operating Environment | Operating Temperature | -20℃~+60℃ |
| Certificate | Certificate Requirement | CE / TUV / RoHs / RED |
Others | IP Rating | IP20 (Built-in) |
| Installation Size | 60.6 X 35.5 X 25.1mm |
| Packaging Requirement | Bubble bag +Outer Carton(K=A) |
| Life | 50000h |
ON/OFF Daylight sensor Detection area Warranty 5 years Hold time
Dimensions:
Super compact design with size of 60.6*35.5*25.1mm which could be
easily installed inside of kinds of LED light.
Wiring Diagram:
4-pole press-in terminal (L, N,N,L′),easy assembly.
Detection coverage:
Max. detection range will be 12m for ceiling mounted; Max.
Detection range will be 10m for wall mounted.
Dip switch settings:
Detection area Hold time Daylight threshold
Detection area means Hold-time means the Daylight sensor priors
detection coverage. It Time period the light to motion sensor. Set
can be adjusted by Will be ON after the threshold for specific
combining DIP last detection. needs. If disable, only
switches for specific motion sensor works.
application.
Application:
The motion sensor can penetrate most of objects such as glass,
wood, plastic but metal. It won’t be affected by ambient
temperature, dust and widely applied in office, corridor, fire
exit, warehouse, basement and other indoor lighting places for
saving energy.
HD08S.pdf
