Compact 12V DC Motion Sensor 5.8GHz Microwave Sensor Rod Antenna 9
DIP Switch
HD016VCRH 2 is a super compact and slim design 12 volt DC microwave
motion sensor with a rod antenna to be easily installed inside of
LED light. 1-10V dimming motion detector with DIP switch to set all
parameters and also support remote control settings.
Features:
1. 12VDC Operating Voltage with 1-10V Dimming function
2. Automatically turn on/up/down/off the LED light when detect
movement or no movement.
3. With rod antenna module, easily installed inside of tri-proof
and linear light with a very small holl
4. 5 years warranty
5. With 9 DIP switch keys, it provides more options for the Hold
time, Detection area, Stand-by period, Stand-by dimming level and
Daylight threshold.
6. Turn off the light or dim the light to a lower brightness like
10%, 20% and the like when no movement to save energy and play a
role of sustainability.
7. IP20
8. Certificate of CE/RoHs
Specifications:
| Safety & EMC | Approval | CE, ROHS |
| Sensor Parameters | Operating temperature | -20°C~+60°C |
| Daylight threshold | 2Lux/10Lux/50Lux/ Disable |
| Detection angle | 30°-150° |
| Detection Area | 50%100% |
| Stand-by period | 0s/30s/20min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Stand-by power | <0.5W(standby) |
| Hold time | 5s/30s/1min/10min |
| Mounting Height | Max.4m/13.12ft |
| Detection range | Max.10m/32.8ft |
| Wireless Parameters | Microwave Frequency | 5.8 GHz ±75 MHz |
| Microwave power | <0.3mW |
| Input | Operating voltage | 12VDC |
| Operating current | ≤25A(Max) |
| Others | Packaging Requirement | Bubble pack, paper flat, outer carton. |
| Installation | Installed inside lamps |
| Warranty | 5 years |
| IP rating | IP 20 |
| Life time | 50000h |
ON/OFF Daylight sensor Detection area Hold time Warranty 5 years
stand-by period stand-by dimming
level
Dimensions:
Rod antenna makes reliable detecting, avoid false trigger when
sensor built-in backside of metal LED plate.
Wiring Diagram:
Three control line to be connect with LED driver:
RED is for connecting with +12V
BLACK is for connecting with GND
YELLOW is for connecting with OUT
Detection coverage:
Max. detection range will be 12m/39.36ft for ceiling mounted with
Max. Mounting height of 2.5-4M/8.2-13.12ft.
Dip switching settings:
Detection Area (Sensitivity)
In this area,movement will be detected and able to trigger the
sensor.
100% detection area is also known as the strong sensitivity.
Hold Time
| 2 | 3 | |
| Ⅰ | ON | ON | 5s |
| Ⅱ | ON | - | 30s |
| Ⅲ | - | ON | 1min |
| Ⅳ | - | - | 10min |
The period of light
keeping 100% brightness after moving objects
leave the detection area.
Daylight Threshold
| 4 | 5 | |
| Ⅰ | ON | ON | Disable* |
| Ⅱ | ON | - | 50Lux |
| III | - | ON | 10Lux |
| Ⅳ | - | - | 2Lux |
*Disable means the daylight sensor does not work.
The sensor will turn on light once motion is detected regardless of
ambient light level.
Definition of the ambient brightness; only when the ambient brightness is lower than the
preset specific lux amount, the sensor will work; when it's preset
as"disable",the sensor works everytime it detects motion regardless
the ambient brightness.
Stand-by Period
| 6 | 7 | |
| Ⅰ | ON | ON | 0s |
| Ⅱ | ON | - | 30s |
| Ⅲ | - | ON | 20min |
| Ⅳ | - | - | +∞ |
The period of light keeping low output before it's completely
switched off. When it's preset as"∞“, the light always keep at low
output if no movement in the detection area and doesn't turn off.
Stand-by dimming level
| 8 | 9 | |
| Ⅰ | ON | ON | 10% |
| Ⅱ | ON | - | 20% |
| Ⅲ | - | ON | 30% |
| Ⅳ | - | - | 50% |
The definition of low output in the standby period.
It could penetrate most materials like glass, plastic and the like
but metal which make it be very widely used for ceiling
light/tri-proof light and panel light in different occasions like
parking lot, production, industrial field and so on.
HD016VCR
1, 2.pdf
