DC motion detector rod antenna lighting occupancy sensor liner
design dip switch on the back
Features:
- Liner design sensor with operating voltage of 12VDC for ceiling
light,tri-proof light,battenlight and panel light.
- With 9 DIP switch keys, it provides more options for the Hold time,
Detection area, Stand-by period, Stand-by dimming level and
Daylight threshold.
- Turn off the light or dim the light to a lower brightness like 10%,
20% and the like when no movement to save energy and play a role of
sustainability.
- Smartly turn on the light to be 100% brightness when detect the
movement with an insufficient daylight.
- With rod antenna, the module is super compact to be easily
installed inside of tri-proof and linear light with a very small
hole.
- IP20 and 5 years of warranty.
- Certificate of CE/RoHs
Specifications:
| Safety & EMC | Approval | CE, ROHS |
| Sensor Parameters | Operating temperature | -20°C~+60°C |
| Daylight threshold | 2Lux/10Lux/50Lux/ Disable |
| Detection angle | 30°-150° |
| Detection Area | 50%100% |
| Stand-by period | 0s/30s/20min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Stand-by power | <0.5W(standby) |
| Hold time | 5s/30s/1min/10min |
| Mounting Height | Max.4m/13.12ft |
| Detection range | Max.10m/32.8ft |
| Wireless Parameters | Microwave Frequency | 5.8 GHz ±75 MHz |
| Microwave power | <0.3mW |
| Input | Operating voltage | 12VDC |
| Operating current | ≤25A(Max) |
| Others | Packaging Requirement | Bubble pack, paper flat, outer carton. |
| Installation | Installed inside lamps |
| Warranty | 5 years |
| IP rating | IP 20 |
| Life time | 50000h |
ON/OFF Daylight sensor Detection area Hold time Warranty 5 years
stand-by period stand-by dimming
level
Dimensions:
Rod antenna makes reliable detecting, avoid false trigger when
sensor built-in backside of metal LED plate.
Wiring Diagram:
It’s very simple to be connected with the driver and LED light.
Detection coverage:
Max. detection range will be 12m/39.36ft for ceiling mounted with
Max. Mounting height of 2.5-4M/8.2-13.12ft.
Dip switching settings:
Detection Area (Sensitivity)
In this area,movement will be detected and able to trigger the
sensor.
100% detection area is also known as the strong sensitivity.
Hold Time
| 2 | 3 | |
| Ⅰ | ON | ON | 5s |
| Ⅱ | ON | - | 30s |
| Ⅲ | - | ON | 1min |
| Ⅳ | - | - | 10min |
The period of light
keeping 100% brightness after moving objects
leave the detection area.
Daylight Threshold
| 4 | 5 | |
| Ⅰ | ON | ON | Disable* |
| Ⅱ | ON | - | 50Lux |
| III | - | ON | 10Lux |
| Ⅳ | - | - | 2Lux |
*Disable means the daylight sensor does not work.
The sensor will turn on light once motion is detected regardless of
ambient light level.
Definition of the ambient brightness; only when the ambient brightness is lower than the
preset specific lux amount, the sensor will work; when it's preset
as"disable",the sensor works everytime it detects motion regardless
the ambient brightness.
Stand-by Period
| 6 | 7 | |
| Ⅰ | ON | ON | 0s |
| Ⅱ | ON | - | 30s |
| Ⅲ | - | ON | 20min |
| Ⅳ | - | - | +∞ |
The period of light keeping low output before it's completely
switched off. When it's preset as"∞“, the light always keep at low
output if no movement in the detection area and doesn't turn off.
Stand-by dimming level
| 8 | 9 | |
| Ⅰ | ON | ON | 10% |
| Ⅱ | ON | - | 20% |
| Ⅲ | - | ON | 30% |
| Ⅳ | - | - | 50% |
The definition of low output in the standby period.
Application Demo - Function Demo-On/off control:
With sufficient daylight, With insufficient daylight, After the
last detection
even when motion when motion detected, and the present hold
detected, light remains light ON. time elapsed, light OFF.
After the stand-by period,light OFF.
Application:
The microwave sensor won’t be affected by ambient temperature, dust
which is better than PIR sensor. It could penetrate most materials
like glass, plastic and the like but metal which make it be very
widely used for ceiling light/tri-proof light and panel light in
different occasions like parking lot, production, industrial field
and so on.
HD016VCR
1, 2.pdf
