Dimmable 12W 25W DIP Switch Linear Motion Sensor With Rod Antenna
Dip Switch Dual PD Lineaar Design For Tri-proof Light RoHS CE
Certificate
HT21V-I.pdf
Features of Dimmable Motion Sensor:
1. 5.8G microwave motion dusk/dawn sensor with dimmable function
2. Slim design is easy for customers to install in th lamps.
3. Tri-level control by 1-10V output.
4. Suitable for tri-proof light and battenlight.
5. Sensitive and reliable
6. IP 20 and 3 years warranty.
Technical data of Dimmable Motion Sensor:
| Model number | HT21V-I | | Input voltage | 120-240-277VAC,50Hz/60Hz | | Input current | 0.23A Max | | Input power | 28W(Max) | | Output LED current | 0.3A/0.4A ±5% (30-54V); 0.5A/0.55A/0.6A ±5% (30-42V) | | Output LED voltage | 30V-54V DC | | Output LED power | 12-25W | | Stand-by power | <0.5W(230VAC) | | Empty load voltage | ≤63VDC | | Power factor | ≥0.9 | | Efficiency | ≥83% (Max.) | | Microwave frequency | 5.8GHz±75MHz | | Microwave power | <0.3mW | | Detection area | 50%/100% | | Hold time | 5s/60s/5min/10min | | Daylight threshold | 2Lux/10Lux/50Lux/Disable | | Stand-by period | 0s/10s/10min/+∞ | | Stand-by dimming level | 10%/30% | | Mounting height | 2.5-4m (ceiling mounted) | | Deteation range | ø4-6m (ceiling mounted) | | Motion detection | 0.5–1.5m/s | | Packing method | ①the bubble pack, ②paper flat, ③outer carton(400*300*236mm)with drying agent(The sensor
66pcs/carton,gross weight 8.34kg) | | Detection angle | 30°-150° | | Operating temperature | Ta: -20°C~55°C Tc: 80°C | | Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP | | EMC standard | EN55015 | | Safety standard | EN61347-1 EN61347-2-13 EN60598-1 | | IP rating | IP 20 | | Warranty | 3 years |
|
On/Off Control Detection Area Hold Time Daylight Sensor
Stand-by dimming Stand-by Output Current Remote Control
level Period
Dtection Area of Dimmable Motion Sensor:
The fixture indicates teh maximun distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-4M.
1: Detection area:
In this area, movement will be detected and able to trigger the
sensor. 100% detection area is also known as the strong sensitvity.
2-3: Hold time:
The period of light keeping 100% brightness after moving objects
leave the detection area.
4-5: Daylight threshold:
Definition of the ambient brightness; only when the ambient
brightness is lower than the preset specific lux amount, the sensor
will work; when it's preset as "disable", the sensor works
everytime it detects motion regardless the ambient brightness.
6-7: Stand-by period:
The period of light keeping low output before it's completely
switched off. When it's preset as"∞“, the light always keep at low
output if no movement in the detection area and doesn't turn off.
8: Stand-by dimming level:
The definition of low output in the standby period.
9: Mode selection:
Sensor mode on when the DIP switch is up;sensor mode off when the
DIP switch is down.
Daylight periority of Dimmable Motion Sensor:
Dusk/Dawn sensor:
Our special active photocell technology can tell the difference
between natural light and LED light, to
ensure the light will be off when needed.
With Daylight priority function, HT30V is able to differentiate
artificial light brightness from
natural light after installed inside the fixture, and automatically
turn off light when ambient
brightness exceeds preset lux level.
Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10% or 30%;
3. Daylight threshold is on 2Lux, 10Lux or 50Lux.
Lux on/off:
Light automatically With insufficient Lights dims to standby Light
off when
on when ambient ambient brightness level if no motion ambient lux
level is
brightness is lower light dims to 100% detected after higher than
preset
than preset lux level. when motion holdtime. Lux mount.
detected.
User Notes:
1. Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume.
4. Conduct test on sunny days without the lampshade which will
affect the tested lux value.
5. Factory default setting:detection area 100%/hold time
5s/daylight threshold disable/satnd-by period 0s/stand-by dimming
level 10%.
