Round Plane Antenna 34W Dimmer Motion Sensor Ceiling Mounted Design
Round Design Plane Antenna For Ceiling Light Dusk Dimmable Motion
Sensor
Features:
1. Constant current output.
2. On/off control by relay.
3. Tri-level control by 1-10V output.
4. Suitable for ceiling lights and Bulkhead.
5. Sensitive and reliable
6. IP 20 and 3 years warranty.
Technical data:
| Model number | HT30V | | Input voltage | 220-240VAC,50Hz/60Hz | | Input current | 0.15A Max | | Input power | 34W Max | | Output LED current | 0.45A/0.55A/0.60A/0.70A±5% | | Output LED voltage | 24V-52V DC | | Output LED power | 18-30W | | Stand-by power | <0.5W(230VAC) | | Empty load voltage | ≤55V DC | | Power factor | ≥0.9 | | Efficiency | ≥85% (Max.) | | Microwave frequency | 5.8GHz±75MHz | | Microwave power | <0.3mW | | Detection area | 50%/100% | | Hold time | 5s/60s/5min/10min | | Daylight threshold | 2Lux/10Lux/50Lux/Disable | | Stand-by period | 0s/10s/10min/+∞ | | Stand-by dimming level | 10%/30% | | Mounting height | 2.5-6m /8.2-19.68ft(ceiling mounted) | | Deteation range | Max.ø14m (ceiling mounted) | | Motion detection | 0.5–1.5m/s | | Packing method | ①the bubble pack, ②paper flat, ③outer carton(400*300*236mm)with drying agent(The sensor
100pcs/carton,gross weight 9.78kg) | | Detection angle | 30°-150° | | Operating temperature | Ta: -20°C~55°C Tc: 85°C | | Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP | | EMC standard | EN55015 | | Safety standard | EN61347-1 EN61347-2-13 EN60598-1 | | IP rating | IP 20 | | Warranty | 3 years |
|
On/Off Control Detection Area Hold Time Daylight Sensor
Stand-by dimming Stand-by Output Current
level Period
Dtection Area:
The fixture indicates teh maximun distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-6M.
Wiring diagram:
Output current setting:
Set the current to be 350mA by plugging black cap on 1 and 2
PIN,and 300mA by plugging on 2 and 3 PIN.
Setting:
1: Detection area:
In this area, movement will be detected and able to trigger the
sensor. 100% detection area is also known as the strong sensitvity.
2-3: Hold time:
The period of light keeping 100% brightness after moving objects
leave the detection area.
4-5: Daylight threshold:
Definition of the ambient brightness; only when the ambient
brightness is lower than the preset specific lux amount, the sensor
will work; when it's preset as "disable", the sensor works
everytime it detects motion regardless the ambient brightness.
6-7: Stand-by period:
The period of light keeping low output before it's completely
switched off. When it's preset as"∞“, the light always keep at low
output if no movement in the detection area and doesn't turn off.
8: Stand-by period:
The definition of low output in the standby period.
Daylight periority:
Dusk/Dawn sensor:
Our special active photocell technology can tell the difference
between natural light and LED light, to
ensure the light will be off when needed.
With Daylight priority function, HT30V is able to differentiate
artificial light brightness from
natural light after installed inside the fixture, and automatically
turn off light when ambient
brightness exceeds preset lux level.
Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10% or 30%;
3. Daylight threshold is on 2Lux, 10Lux or 50Lux.
Lux on/off:
Light automatically With insufficient Lights dims to standby Light
off when
on when ambient ambient brightness level if no motion ambient lux
level is
brightness is lower light dims to 100% detected after higher than
preset
than preset lux level. when motion holdtime. Lux mount.
detected.
Application:
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at
night.Applications:Corridor,Staircase.The daylight threshold is set
to"2Lux,10Lux,50Lux".
With sufficient daylight,even With insufficient daylight, After the
last detection and the
when motion detected,light when motion detected, present hold time
elapsed,
remains OFF. light ON. light OFF.
2. No daylight function:
The daylight threshold is set to"Disable".Light on when detect
movement,after people leave,light off after stand-by
period,Applications:Dim places such as basement parking ,underpass.
When motion is detected, After people leave the After the last
detection and
the sensor will switch on the detection area,light remains the
present hold time
light to 100% brightness. 100% brightness within elapsed,light OFF.
hold time.
3. Function demo-dimable control/corridor function
With sufficient daylight,even With insufficient daylight, After the
last detection the light
when motion detected,light when motion detected, will be dimmed
down to the
remains OFF. light ON. stand-by dimming level
(10% or 30%)after hold time
