UL FCC 1V 10V Dimmable Motion Sensor Planner Antenna DIP Switch
UL FCC Dimmable Motion Sensor Planner Antenna 12 DIP Switch White
Appearance
Features:
1. 5.8GHz microwave motion sensor with dimmable function.
2. Suitable for ceiling lights or bulkhead.
3. Max installation height is 15m/49.2ft.
4. Can pull out and plug for easy installation
5. Sensitive and reliable.
6.1-10v dimming.
7. IP 20 with 5 years warranty.
Product Description:
| Operating voltage | 120-277VAC,50Hz/60Hz |
| Switching capacity | Max,3.0A@120Vac,50/60Hz; Max,2.0A@277Vac,50/60Hz |
| Stand-by power | ≤1w |
| Control method | on/off /1-10v dimming |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Detection area | 10%/50%/75%/100% |
| Hold time | 5s/30s/1min/5min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/50Lux/Disable |
| Stand-by period | 0s/10s/1min/10min/30min/1H/∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Interfaces | 6-pole pluggable clamp temminal(L,N,N,L',1-10V+,1-10V-)for
0.75-1.5mm² cable |
| Mounting height | 2.5-6m /8.2-19.68ft |
| Deteation range | Max.ø14m/45.93ft |
| Motion detection | 0.5–1,5m/s |
| Packing method | ①the bubble pack, ②paper flat, ③outer carton(400*300*236mm)with drying agent(120pcs/carton,8.8kg
gross weight) |
| Detection angle | 30°-150° |
| Operating temperature | –20℃–+55℃ |
| IP rating | IP 20 |
| Warranty | 5 years |
ON/OFF Control Detection Area Daylight Threshold
Warranty 5 years Hold Time Stand-by period stand-by dimming level
Detection Range
This figure indicates the maximum distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-6m.
Mechanical structure
1-10v dimming
with two installation hole for easy connect the end user lamp
12 DIP switchs set parameters which you want
Wiring diagram
Dimensions (mm)
Settings:
Detection area:
In this area,movement will be detected and able to trigger the
sensor,100% detection area is also known as the strong sensitivity.
Hold time:
The period of light keeping 100% brightness after moving object
leave the detection area.
Daylight threshold:
Difinition of ambient brightness;only when the ambient brightness
is lower than the preset spercific LUX amount,the sensor will
work;when it's perset "Disable" the sensor works everytime it
detects motion regardless ambient brightness.
Stand-by period:
The period of light keeping low output before it's completely
switched off,when it's preset as"∞" the light always keep at low
output if no movement in the detection area and doesn't turn off.
Stand-by dimming level:
The definition of the lower output in the stand-by period.
Installation Method:
Application Demo1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
With sufficient daylight, With insufficient daylight, After the
last detection and
even when motion detected, when motion detected, light ON. the
present hold time
light remains OFF. elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after
stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected, After people leave the detection After the
last detection and
the sensor will switch on the area, light remains 100% the present
hold time
light to 100% brighteness. brightness within hold time. elapsed,
light OFF.
3. Function Demo - Dimmable control/Corridor function:
With sufficient daylight, With insufficient After last detection,
the After the stand-by
even when motion daylight, when motion light will be dimmed
period,light OFF.
detected, light remains detected,light ON. down to the stand-by
OFF. dimming level
(10%,20%,30% or 50%)
after holdtime.
Application:
User Notes:
1.Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume.
4. Conduct test on sunny days without the lampshade which will
affect the tested lux value.
HD401V.pdf
