Ceiling Mounted 18W Dimmable Motion Sensor 8 Dialing Code Plane
Antenna
Plane Antenna 8 Dialing Code Smart Lighting Control Output LED
Power 18W
Features:
1. Suitable for small size areas such as
aisle,staircaase,horizontal,bathroom,kitchen.
2. Power factor be equal or greater than 0.9.
3. Obtain EMC certification,and certificate number is EN55015.
4. Use quarantine protocal,safe and reliable.
5. Operating temperature would be –20℃–+50℃.
6. IP 20 and 3 years warranty.
Technical data:
| Model number | HT18V-I | | Input voltage | 220-240VAC,50Hz/60Hz | | Input current | 0.8-1.4A Max | | Input power | 20W Max | | Output LED current | 0.3A/0.35A/0.45A/0.5A | | Output LED voltage | 24-42V/24-42V/24-42V/24-40V | | Output LED power | 8-15W/10-16W/12.5-18W/14-18W | | Stand-by power | ≤0.5W(230VAC) | | Empty load voltage | ≤55V | | Power factor | ≥0.9 | | Efficiency | 85%(Max.) | | Microwave frequency | 5.8GHz±75MHz | | Microwave power | <0.3mW | | Detection area | 50%/100% | | Hold time | 5s/90s/5min/10min | | Daylight threshold | 2Lux/10Lux/50Lux/Disable | | Stand-by period | 0s/10s/10min/+∞ | | Stand-by dimming level | 10%/30% | | Mounting height | Max.6m (ceiling mounted) | | Deteation range | Max.ø14m (ceiling mounted) | | Motion detection | 0.5–1.5m/s | | Packing method | ①the bubble pack, ②paper flat, ③outer carton(400*300*236mm)with drying agent(95pcs/carton,gross
weight 9.68kg) | | Detection angle | 30°-150° | | Operating temperature | –20℃–+50℃ Tc:80℃ | | Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP | | EMC standard | EN55015 | | Safety standard | EN61347-1 EN61347-2-13 EN60598-1 | | IP rating | IP 20 | | Warranty | 3 years |
|
On/Off Control Detection Area Hold Time Daylight Sensor
Stand-by dimming Stand-by Output Current
level Period
Dtection Area:
The fixture indicates teh maximun distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-6M.
Mechanical structure:
Dimensions:
Wiring diagram:
Setting:
By dialing the code you can set the parameters you want to achieve
the effect you want.
Detection area: Hold time: Daylight threshold: Stand-by period:
Stand-by period:
In this area, The period of Definition of the The period of The
definition
movement will light keeping ambient brightness; light keeping of
low output
be detected 100% brightness only when the low output in the
stand-by
and able to after moving ambient brightness before it's period.
trigger the objects leave is lower than the completely
sensor.100% the detection preset specific switched off,
detection area area. lux amount,the when it's preset
is also known sensor will be work; as"∞",the light
as the strong when it'spreset as always keep at
sensitivity. "disable",the sensor low output if
will work everytime no movement in
it detects motion the detection
regardness the area and doesn't
ambient brightness. turn off.
Installation Method:
The installation finished product drawing is shown:
Application:
1.Automatically ON/OFF function:
Light on when detect movement and off after people leave at
night.Applications:Corridor,Staircase.The daylight threshold is set
to"2Lux,10Lux,50Lux".
With sufficient daylight,even With insufficient daylight, After the
last detection and the
when motion detected,light when motion detected, present hold time
elapsed,
remains OFF. light ON. light OFF.
2.No daylight function:
The daylight threshold is set to"Disable".Light on when detect
movement,after people leave,light off after stand-by
period,Applications:Dim places such as basement parking ,underpass.
When motion is detected, After people leave the After the last
detection and
the sensor will switch on the detection area,light remains the
present hold time
light to 100% brightness. 100% brightness within elapsed,light OFF.
hold time.
3.Function demo-dimable control/corridor function
With sufficient daylight,even With insufficient daylight, After the
last detection the light
when motion detected,light when motion detected, will be dimmed
down to the
remains OFF. light ON. stand-by dimming level
(10% or 30%)after hold time
After the stand-by period,
light OFF.
Application:
User Notes:
1. Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume.
4. Conduct test on sunny days without the lampshade which will
affect the tested lux value.
5. Factory default setting:detection area 100%/hold time
5s/daylight threshold disable/satnd-by period 0s/stand-by dimming
level 10%.
HT18V-I.pdf
