Indoor Light HD02V 1 Dimmable Motion Sensor Rod Antenna 12 Dip
Switch
Indoor Light Dimmable Motion Sensor Rod Antenna 12 Dip Switch
220-240 Operating Voltage
Features:
1. 5.8GHz microwave motion sensor with dimmable function.
2. Smart swithes and dimmers when detecting movement of objects.
3. Optional detection range, holdtime ,stand-by period,stand-by
dimming level and daylight threshold.
4. Supports DIP switch programming,sensitive and reliable.
5. Suitable for tri-proof light.
6. IP 20 with 5 years warranty.
Product Description
| Operating voltage | 220-240VAC,50/60Hz |
| Switching capacity | Max.400W(Control gear)Max.800W(Incandescent lamp) |
| Stand-by power | ≤1w |
| control method | on/off / 1-10v dimming |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Detection area | 10%/50%/75%/100% |
| Hold time | 5s/30s/1min/5min/10min/20min/30min |
| stand-by period | 0s/10s/1min/10min/30min/60min/∞ |
| stand-by dimming level | 10%/20%/30%/50% |
| daylight threshold | 2Lux/10Lux/50Lux/Disable |
| interfaace | 7-pole pluggable clamp terminal(L,N,N,L',1-10V+,1-10V-,SYNC)for
1.5mm² cable |
| Mounting height | 2.5m-4m/8.2-13.12ft |
| deteation range | MaxØ4-10m/13.12-32.8ft |
| motion detection | 0.5–1,5m/s |
| operating temperature | –20℃–+55℃ |
| IP rating | IP 20 |
| Warranty | 5 years |
ON/OFF Control Detection Area Daylight Threshold Stand-by Period
Warranty 5 years Hold Time Stand-by Dimming Level
Detection Range
This figure indicates the maximum distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-4m.
Mechanical structure
With twelve DIP switch poles to set all parameters
With seven poles to easily connect with LED driver and power supply
With two installation hole, easily fixed to the lighting fixture
for end user.
Wiring diagram
Dimensions (mm)
DIP Switch Setting
Detection Area:
In this area, movement will be detected and able to trriger the
sensor,100% detection area is known as the strong sensitivity.
Hold Time:
The period of light keeping 100% brightness after moving objects
leave the detection area.
Daylight Threshold:
Definition of the ambient brightness;only when the ambient
brightness is lower than the preset spcific lux amount,the sensor
will work;when it's preset as "disable",the sensor works everytime
it detects motion regardless the ambient brigtness.
Stand-by period:
The period of light keeping low output before it's compeletely
switched off,when it's preset as"∞" the light always keep at low
output if no movement in the detection area and doesn't turn off.
Stand-by dimming level:
The difinition of low output in the stand-by period.
Application Demo
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
With sufficient daylight, With insufficient daylight, After the
last detection and
even when motion detected, when motion detected, light ON. the
present hold time
light remains OFF. elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after
stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected, After people leave the detection After the
last detection and
the sensor will switch on the area, light remains 100% the present
hold time
light to 100% brighteness. brightness within hold time. elapsed,
light OFF.
3.Function Demo-Dimmable control/Corridor function
With sufficient daylight, With insufficient After the last
detection, After the stand-by period
even when motion daylight when the light will be dimmed light off.
detected,light motion detected, down to the stand-by
remains off light on, dimming level
(10%,20%,30% or 50%)
after holdtime.
User Notes:
1. Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume.
4. Conduct test on sunny days without the lampshade which will
affect the tested lux value.
HD02V
1.pdf
