Detach-design Microwave Motion Sensor Switch ON/OFF Function with
120-277V controlled by remote controller
Features:
- ON/OFF function sensor with operating voltage of 120-277VAC
- Detached design which connect with DC Sensor of HD02VR-1 for most
different structure of LED light like batten light, tri-proof light
and ceiling light etc.
- Basic Micorwave Motion Sensor for easily installation and widely
using in the smart lighting control industry.
- Detached design which make it happen to install the big part inside
of the lighting fittings and expose the smaller part out of the
metal plate.
- Automatic light on base on the detection of motion when the ambient
light is insufficient
- 4-Pole pluggable clamp terminal (L,N,N,L’) for 1.5mm² cable
- Detection area, hold time and daylight threshold can be precisely set via remote controller.
- IP Rating would be IP20 and 5 years of warranty.
Specifications:
| Input | Operating Voltage | 120-277VAC 50/60Hz |
| Stand-by Power | ≤1W |
| Output | Switching Capacity | Max.3.0A,120Vac; Max.2.0A,277Vac |
Sensor Parameters | Hold Time | 5s/1min/5min/15min |
| Detection area | 50% / 100% |
| Daylight Threshold | 2Lux/10Lux/50Lux/Disable |
| Mounting Height | Max.6m(ceiling mounted); Max.3m(wall mounted) |
| Detection Range | Max.14m(ceiling mounted); Max.10m(wall mounted) |
Wireless Parameters | Operating Frequency | 5.8 GHz ±75 MHz |
| Switch Control | 0N/0FF |
Operating Environment | Operating Temperature | -20℃~+60℃ |
| Certificate | Certificate | CE / RoHs |
| Others | Wiring Method | 4-pole terminal (Input grey L. N. Output grey N. L’) |
| IP Rating | IP20 (Built-in) |
| Installation Size | 80.2*36.6*23mm / 51*24.4*14mm |
| Packaging | Bubble bag +Outer Carton(K=A) |
| Life | 50000h |
ON/OFF Daylight sensor Detection area
Hold time Warranty of 5 years Remote control
Wirng diagram:
4-pole terminal (Input grey L. N. Output grey N. L’)
Dimensions:
Detached design which make it happen to install the big part inside
of the lighting fittings and expose the smaller part out of the
metal plate.
Detection coverage:
Max. detection range will be 14m for ceiling mounted; Max.
Detection range will be 10m for wall mounted.
Demo:
With sufficient daylight, With insufficient daylight,when
even when motion motion detected,light ON.
detected, light remains OFF.
After last detection,the light will be
dimmed down to the stand-by
dimming level after holdtime.
Applications:
The motion sensor can penetrate most of objects such as glass,
wood, plastic but metal. It won’t be affected by ambient
temperature, dust and widely applied in office, corridor, fire
exit, warehouse, basement and other indoor lighting places for
saving energy.
